Vision Drive VD-3000 Bedienungsanleitung

Ver. VD3000E 1.0ECAR BLACK BOXTMUser Manual

9Installation PrecautionsFor safe installation and use, read all the information provided below.This product only uses Vision Drive SD card.(The progr

10Installation SequenceConnect the bracket and the unit Insert SD card into the unitConnect cable and attach on windshieldConnect to power source and

11Installation ProcedureConnect the bracket and the unit Place the bracket inside the groove of the unit then slide the bracket tothe left to click on

12Installation ProcedureAfter connecting the bracket and the unit, insert the SD card as shownabove in the picture.When ejecting the SD card from the

13Installation ProcedureConnect cable and attach on windshield Connect to the cigar jack after all the cable is connected and the attachment is nis

14Installation ProcedureConnect to power source and turn on the unitInsert the cigar jack into an appropriate outlet then turn on the engine.When the

15Installation ProcedureAdjust the camera angleMove the camera top to bottom to x it to a recordable position.Press [VIEW] button to see the view xe

1660’Installation ProcedureBracketUnitCameraVehicle ExteriorHighest PositionLowestPositionVehicle Interior (Driver’s Side)WindshieldWhen the unit is a

17Installation ProcedureWhile viewing the LCD screen or analysis program, the dashboardof the vehicle should be showing within 1/3 of the screen.

18Installation ProcedureCheck LED lampsThe GPS lamp is red when the GPS signal is not connected and blue when it is connected. The GPS connection may

2367891011202938INDEXBefore UseCautionProduct StructurePart NamesProduct SpecicationInstallation PrecautionsInstallation SequenceIntallation Procedur

19Organize cable lineInstallation ProcedureUse the enclosed cable holders to organize the cable line.

20Product UseStart up- Turn o the engine and remove the key from ignition.- Check to see if the SD card is inserted into the unit.- Turn on the engin

21Product UseNormal Recording and Event Recording- While the power is on, the normal recording is on as well. The REC lamp willbe blinking blue.- In n

22Product UseManual Recording- When the [SHOT] button is pressed, the alarm will sound and the recorded datawill be saved in the (EVENT) folder. - Eve

23Product UseViewing- Press the [VIEW] button to view the scene that the product is recording.- Pressing the [VIEW] button again will turn o the LCD

24Product UseParked Surveillance Mode- While parked, hold the [PLAY] or the Function [I] button for 3 seconds,a voice notication will notify that the

25Product UseSD Card Use- The Vision Drive product will only work with the SD card issued from Vision Drive. VD SD cards carry programs necessary to o

26Product UseEvent File Replay- When the [PLAY] button is pressed, the last event store will be played.- While play mode is on, if you press the [VIEW

27Product UseVoice Recording- When the [SHOT] button is held for more than 3 seconds, the voice notication will announce that the voice recording wil

28Product UseAutomatic System Check and Safe Rebooting Function- This product is programmed to automatically check and reboot the system,if the produc

Before UseThank you for choosing this product.The following contents describe the responsibility scope of the warranty service covered by us and the p

29PC Analysis Program Use*** The skin used for the analysis program may vary by the version ***Program Start Up- After the SD card is connected to the

30PC Analysis Program UseProgram Information

31PC Analysis Program UseHow to play the les- To play a certain le, select the le from the list located on the right side. - The most recent data w

32PC Analysis Program UsePreview FunctionAuto-play Function- When a le is selected, a preview of the rst frame of the data is shown on thescreen, as

33PC Analysis Program UseInterworking with the map- With the GPS data, the map shows the location of the vehicle while playing the recorded data.- The

34PC Analysis Program UsePLAY / PAUSE / PREVIOUS FRAME / LATTER FRAMEBRIGHTNESS CONTROLSPEED METER- When the play button is pressed, it will replay th

35PC Analysis Program UseG Sensor / Shock Sensor Graph- The graph below shows impacts on the xyz axises of the vehicle.- The bottom left shows the tot

36PC Analysis Program UseConverting to AVI le- The data les in the SD card are Vision Drive les and willonly work within VDAnalayzer program.- To

37PC Analysis Program UseConguration- The video resolution and quality settings can be congured.- If the resolution is high, the le’s size also bec

38WarrantyThe warranty is for 1 year from the date of purchase. If the productmalfunctions on itself under normal use, you can have the product repai

CautionThe Vision Drive SD card is the only usable SD card for Vision Drive.In case of a lost or stolen SD card, please contact your local retail shop

39VISIONDRIVE VD-3000Warranty CerticateWarranty CerticateProduct NamePurchase DateRetail ShopModel NameSerial NumberWarrantyPeriodIf the product mal

40All hardwares, softwares, design and logo of the product is copyrighted by the manufacturer of the product.Copy, disassembly, remake and distributio

CAR BLACK BOXTM

CautionDo not use chemicals or detergents to clean the device. This can result in product malfunctioning.Excessive tinting on the window may distort o

CautionDropping or giving an impact on the product during operation can cause defect or re.Do not keep the product in an extreme temperature or in hu

Product StructureThe manual and/or quick guide maybe provided on a digital le.Product setting may change anytime without notice.Attach Bracket Wire h

7Part NamesFor models with LCD screenREC LEDGPS LEDMIKEVIEW BUTTONPLAY BUTTONSHOT BUTTONLCD SCREENGPS SENSORCAMERABRACKET ATTACHED TO THE UNIT’S BODYP

8Product SpecicationCameraResolutionLCDGPSImpact SensorMemorySound RecordingVoice NoticationPowerOperatable PowerOperatable TempConsumptionMemoryEc